0 Membros e 2 Visitantes estão a ver este tópico.
I am just putting this thread up incase anyone is interested in knowing how to take the head unit out for example fitting a rear sub box which is why I have worked out how to do this.First of all carefully place flat blade screwdriver under display surround and carefully lever up the clips the secure it down. This is a picture of the underside so you can aproximate where the clips areThis is view with display surround removed Then remove the panel below the main unit and above the temperature controls. This is done by carefully placing flat blade screwdriver along the top edge, the cattch that holds it in is located at the middle of the top edge. Lever this very carefully so not the break the catch.Now to remove the main unit it you have to first undo the four screws at the top of the unit. Two of them are 7mm screws and two of them are torx size T25.Once the bottom panel is out you can then pull the main unit surround out. The catches that hold this in are along the bottom edge. You can pull these straight back, no need for any tools at this stage, the catches are quite stiff but it is only them (after the top screws have been removed) that are holding the unit in. Once you have the main surround out you can easily disconnect the multi-block connector.View of main unit removedNext to remove the actual head unit. Without any tools simply pull the head unit out. As you can see from the image below there is no pre amp out sockets or USB inputs on te rear of the head unit. If you want to fit a sub box you will need to fit an RCA converter something like this LINKView with head unit out.To refit reverse the above making sure to carefully line up catches so not to break them.View with it all back together. I will be fitting a sub box once I have purchased a RCA converter and I will then put a thread up describing how to do this.
O meu radio tem bluetooth e não tem usb
Falei com secção de peças da ford, e deram me o valor de €20 para porta USB. Parece me um valor um pouco estranho!!!!Se assim for ainda instalo sem fazer discussão
Citação de: cristo em 20 de Novembro, 2010, 20:39:30O meu radio tem bluetooth e não tem usbSei que os ultimos trazem usb... o meu tinha essa possibilidade mas nao quis
Apos uma pesquisa na net encontrei istohttp://cgi.ebay.co.uk/CTAFOUSB005-Ford-C-Max-Fiesta-Focus-OEM-USB-Interface-/150472291058?pt=LH_DefaultDomain_3&hash=item2308d8f2f2#shIdIsto sim permite a ligaçao USB num Fiesta.. Ou seja tem o tal "conversor" pelo meio.. um simples cabo nao consegue realizar isso, só se o proprio radio já tiver esse "conversor"
Estava também curioso para saber se é possível trocar de rádio, o meu não tem Bluetooth nem entrada usb, e se fosse possível gostava de mais tarde trocar de rádio..